★ 5.0 from 89 Google reviews|Licensed CRC1335471
Services Portfolio About Blog FAQ Schedule a Free Consultation
How to Choose Cabinet Hardware: Finishes, Sizes and Placement

How to Choose Cabinet Hardware: Finishes, Sizes and Placement

Home โ€บ Blog โ€บ Cabinet Refinishing & Refacing โ€บ How to Choose Cabinet Hardware: Finishes,…

To choose cabinet hardware, decide on knobs, pulls or a mix; pick one finish that works with your faucet and light fixtures; size drawer pulls to roughly a third of the drawer width; and place door hardware 2 to 3 inches in from the corner opposite the hinge. If you’re refinishing or refacing, it’s the best time to change hardware, because the doors are already off and old holes can be filled before the new finish goes on. Here’s the rest of what I’d tell you.

Kitchen cabinet hardware in a Palm Harbor home remodel

Knobs, pulls or both?

  • Knobs are small, simple and one screw each. They suit traditional kitchens and smaller doors.
  • Pulls are easier to grab, especially on drawers, and they make a bigger statement. They suit most modern and transitional kitchens.
  • A mix is common and looks intentional: knobs on the upper doors, pulls on the drawers and base doors. Just keep the finish the same.

What size pulls?

A good rule is about one third of the drawer width. On a typical 18 to 24 inch drawer, that’s a 5 to 8 inch pull. On wide drawers (30 inches and up), use a longer pull or two smaller ones. Pulls are sold by the distance between the screw holes, called center-to-center. Common sizes are 3 inches, 96mm (about 3.75 inches), 128mm (about 5 inches) and 160mm (about 6.3 inches). If you’re keeping your existing holes, measure them before you shop.

Where does the hardware go?

  • Upper doors: near the bottom corner, opposite the hinge, about 2 to 3 inches up and in.
  • Lower doors: near the top corner, opposite the hinge, about 2 to 3 inches down and in.
  • Drawers: centered side to side. On a tall drawer, many people place it slightly above center.
  • Tall pantry doors: a long pull at a comfortable hand height, usually around counter height.

Cabinet pulls on drawers in a Palm Harbor kitchen

Which finish?

  • Brushed brass or gold: warms up white, navy, green and charcoal cabinets. Here’s a Madeira Beach kitchen with a blue island and gold hardware.
  • Matte black: crisp against white and light gray. Modern without being cold.
  • Brushed nickel or stainless: safe and easy, and it matches stainless appliances.
  • Polished chrome: clean in a bathroom with chrome fixtures.

Match the hardware to the faucet or the light fixtures so the room looks planned. Mixing two metals can work (say, brass hardware with black light fixtures), but keep it to two.

What It Costs With Bayshore

There are three ways to change your cabinets, and here is what each costs with us: refinishing (new color) from $5,000, refacing (new door style) from $7,000, or a full kitchen remodel (new cabinets and countertops) from $28,000. Refinishing and refacing take 5 to 7 working days on site and let you keep your countertops.

Which one fits your kitchen? →Refinishing pricing →Refacing pricing →

Typical ranges from our recent projects. Your written estimate, built after we see your space, is what your project is priced on.

Changing hardware during a refinish or reface

If your new pulls don’t match the old hole spacing, the old holes have to be filled. On our refinishing jobs, we fill holes at the start and again before every primer coat, so they disappear under the finish. On a refacing job, the doors are new, so there are no old holes to worry about. Soft-close hinges are a small per-hinge upgrade while the doors are off. Here’s our full refinishing and refacing process.

Examples of cabinet hardware styles and finishes

What does it cost?

Hardware itself ranges from a few dollars to a lot per piece, and it’s priced on your estimate by the piece. With us, cabinet refinishing starts at $5,000 (most medium kitchens $8,000 to $10,000), refacing starts at $7,000 (most medium kitchens $10,000 to $12,500), and kitchen remodels start at $28,000. You can browse hardware styles with cabinets and countertops in our Design Portal.

Frequently asked questions

Should cabinet hardware match the faucet?

It looks best when it matches the faucet or the light fixtures. If it matches neither, it can look like an afterthought.

Can I mix knobs and pulls?

Yes. Knobs on uppers and pulls on drawers is a classic mix. Keep the finish the same.

What size cabinet pulls should I buy?

About a third of the drawer width. Measure the center-to-center spacing if you’re reusing existing holes.

Where do you work?

Across Pinellas County, including Largo, Clearwater, Dunedin, Palm Harbor, Belleair and Seminole.

Updating your cabinets? Book a free consultation. We’ll pick the color and hardware together and I’ll send you a written price. Bayshore Remodels is licensed (CRC1335471) and insured, with 500+ projects across Pinellas and Tampa Bay since 2021.

Share this article
Call (813) 489-1552Get My Price